Use: Upgrade your basic Pyrotechnic GSE to Pyro-Free, our Add-On's are designed to be used with other brands of GSE and simply triggered via their firing circuits.
Use: A Fill Manifold is designed to transfer Nitrous Oxide from the supply tank to the motor just prior to flight. In the event of a missfire the Manifold can dump the contents of the oxidizer tank.
Use: Injection of gaseous Oxygen at the point of ignition through the stem base up the stem to the top of the chamber to aid in ignition. Inlets 1/4 Female NPT, max pressure 250 PSI. Requires gaseous oxygen regulator.
Use: Stem stand are used in conjuction with our unique Fill Stems to allow for very easy set up and adjustment at the pad. Our stem stands are designed to be used with Rails or launch rods.
Use: The High pressure Nitrous "push to connects" are used at the end of a supply hose from your supply tank to make swapping out fill hose sizes a snap! The fittings come complete with the Supply hose end, three inserts, and 1/8, 5/32, 1/4 fill hose fittings. The fittings are 1/4 Female NPT and rated for the high pressures of Nitrous oxide.
Use: The low pressure "push to connect" for the oxygen is the standard fitting used with West Coast Pyro free GSE Stems which allows for easy hook up to the Stem Base. These fittings were choosen with heavy duty use in mind. The fiiting comes complete with one insert. To be installed at the end of your Oxygen supply hose. 1/4 female NPT
